INKBIRD ITC-106VH INKBIRD PID Temperature Controller Kit High Voltage 100ACV to 240ACV Comes with SSR 40DA Solid State Relay K Type Thermocouple and White Heat Sink

Specification 

Product: INKBIRD ITC-106VH PID Temperature Controller 

Front Panel Dimension: 1.89 (W) X1.89(L) inches, or 48mm(W)48mm(L) 

Power Supply Voltage: AC 100-240V 50/60Hz 

Operating voltage range: 85～110% 

Rated voltage Power Consumption: Approx. 5VA(100～240VAC)

Character: 

PV: 4 digital 0.39inch (9.9mm) height Red LED Letters 

SV: 4 digital 0.31inch(8.00mm) height Green LED Letters 

Display Accuracy: 0.2%FS 0.1C(＜1000C); 1C(1000C) 

Period of Sampling: 0.5 seconds 

Temperature Compensation: 32122F (0-50C) 

Weight: Approx. 140g 

Working Temp&RH: -10～55C (no freezing or condensation), RH 35-85% 

Humidity Storage Temp: -25～65C (no freezing or condensation)

For installation: flush-mounting method, and cutout size is 1.771.77inch, or 45mmx45mm; 

K-Type Thermocouple Temperature Rang:0-400℃ 

Sensor Dia: 0.18inch (4.5mm) 

Cable Length:6.6ft(2m) 

External Shielding: Insulated Shielding 

Internal Insulation: Fiberglass 

40A SSR Solid State Relay 

Load Voltage: 24380VAC 

Load Current: 40A 

Input Voltage: DC 332V 

Package 

1x Inkbird PID Temperature Controller 

1x 40A SSR

1x Mounting bracket 

1 x K-Type Thermocouple 

1x Manual.

• 【Alarm Output】With one alarm relay output: AC250V 3A (Resistive load) ON/NC you may connect it with a buzzer
• 【Supports 3 Wires Sensors】3 wires sensor or 2 wires sensor like K type thermocouple and Cu500 are supported by this PID temperature controller
• 【SSR Output】With one relay output for external SSR SSR or relay is a must for this temperature controller A 40DA SSR is included
• 【Digital Display ℃/℉】It’s a digital PID controller but also supports Centigrade and Fahrenheit reading
• 【2 Temp Displaying Windows】The real-time temperature and the setpoint are shown at the same time