SYOSI LED Strip Connector, LED Flexible Light Strip Crystal Buckle Adapter, Waterproof Transparent Solderless Wireless Seamless Track Lighting Connector 5V 12V 24V (4pin, 10mm)

feature:
Ease of use:
You can assemble the wires according to your needs, and our LED strip connectors can be flexibly adapted to different projects. No soldering required. Simply snap the prepared LED strip section into the connector to connect. Compatible with 30-120 LED/M strips, can support high current LED strips.

More tips:
The LED Adapter Connector is suitable for connector use with 24V systems, suitable for RGB light strips with solder pads, IP20 non-waterproof light strips and IP65 waterproof light strips. You can pierce the light bar from the back or the front. The IP20 RGB light bar is recommended to be pierced from the front of the light bar, and the IP65 waterproof light bar is recommended to be pierced from the back without removing the silicone on the surface of the light bar. If you accidentally cover the connector, you can pry it open with a screwdriver.

Please use standard 22 AWG wire for connections. There are some substandard wires on the market that may result in an unsuccessful connection. When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire. Unqualified wires may include: Too little copper core for an accurate connection. The copper core is off center and cannot conduct current. If the wire is qualified but still cannot be connected, cut another wire to try to connect.

advantage
 1. Say goodbye to traditional electrical tape connection, safer, more standardized and more efficient.
 2. Quickly operate wiring to achieve time-saving, labor-saving, simple, fast and cost reduction.
 3. No peeling, no exposed conductors, excellent current-carrying, and no potential safety hazards.

• What will you get? : 20 LED strip connectors, a large number to meet the connection needs in daily life, you can also give these must-have tools as practical gifts to those who need it
• The operation is simple: insert the LED light strip light wire into the guide groove, check whether the positive and negative poles are correct, then press the cover plate down, and align the surface pad of the light strip with the pins on the trac
• How it works: The metal needle on the solderless and gapless LED adapter pierces the copper contacts on the light strip, which ensures a firm connection even with a slight wobble and pull; unqualified wires may include: too little copper core to pr
• Key Features: This 4-pin connector can be used with 10mm/0.4" RGB LED strips and 22 AWG 4-pin wire, solid wire and multi-conductor wire; Tip: Not suitable for 8mm/0.31" LED strips; please use Standard 22 AWG wire for connection; there are some unqu
• High Quality Material: The LED connector is made of high quality PC material, which is strong, safe, not easy to break, light weight and easy to carry.