Generic Light Therapy Mask Wireless Near Infrared and Red Light Therapy Mask Intense Anti-Aging Professional LED Ultra-Light Mask (Gray)

1·Use the most clinically effective bulbs. Each device uses optimized doses of red and near infrared, blue, amber, and light blends to enhance the body's natural cellular healing response to deliver the results you really want.

Clinically proven benefits

Treats minor inflammation

Reduces fine lines and wrinkles

Reduces

Pigmentation and redness

Reduces dull skin

Promotes healthier, younger-looking skin

All-natural, pain-free, no side effects, no downtime.

The O-rays of the dual LED lamps emit effective and uniform red and near infrared light directly to the lower part of the skin, comprehensively caring for the facial area and improving aging issues.

There are 4 modes to choose from:

Near infrared (NIR) 850nm + Red 630nm for anti-aging and repair. IR + IR works on the deepest layers of the skin, stimulating cell regeneration by deeply penetrating the dermis, activating collagen, soothing inflammation, strengthening the skin, and making the skin smoother and brighter.

460nm blue light reduces acne. This antibacterial light kills acne-causing bacteria and is ideal for treating acne-prone skin. Blue light helps purify the skin and regulate sebaceous glands, and is also very effective in soothing allergies.

Amber light, suitable for fading fine lines

Purple light combination (NIR 850nm + red light 630nm + blue light 460nm) is suitable for treating wrinkles all over the body and moderate inflammatory acne.

A combination of comfort and quality: enjoy luxurious skin care every time you wear it.

2. Use steps

1. Clean your face

2. Plug one end of the data cable into the output port of the console and the other end into the power port of the light therapy board;

3. Pass the retractable mask strap through;

4. Put on the mask and make sure nothing is covering your eyes. Adjust the length of the retractable strap to the appropriate position by pulling the strap to adjust the fit and comfort of the mask on the face;

5. Press and hold the on/off button of the controller to turn on;

Press the nose bridge of the mask from the outside to the inside to ensure that the eyes are not exposed to light;

6. Short press the M key to select the treatment mode and start light therapy;

7. Short press the ON/OFF button to set the treatment time. The indicator light at the time controller position flashes. Each light represents 5 minutes. Determine the treatment time you need. The time selection is completed after the indicator light flashes 5 times;

8. When the treatment time is completed, the instrument stops automatically, wipe the mask with a wet wipe, and save it after cleaning.

3·About FAQ

How long will it take to see results?

If you want to see improvements immediately, light therapy at home may not be for you. Remember when I said that these tools are far less effective than office treatments? You may need to wait at least four to six weeks or more to see obvious improvements in your skin. "Make sure you are someone who sticks to it, otherwise it won't get better," added Dr. R. Kim.

Who can use LED masks?

While the treatment is non-invasive and suitable for all skin types, it is worth seeking medical advice if you have a known skin condition such as eczema or psoriasis, and it is not suitable if you are pregnant.

It is also worth noting that if you have an underlying eye condition or are taking medication that makes the skin more sensitive to light (such as antibiotics such as doxycycline), you should avoid using these masks. Because it may cause eye injury.

Does photorejuvenation make the skin thinner?

This will not happen. Photorejuvenation can activate fibroblasts within the skin and increase the synthesis of collagen fibers, elastic fibers and hyaluronic acid. After the new collagen and elastin are rearranged, the skin becomes more elastic, brighter and firmer, with fewer wrinkles and smaller pores. So light therapy beauty will not only thin the skin, but also increase the thickness of the skin, making the skin firmer, more elastic and more youthful.

What is the recommended schedule for facial treatments?

Depending on your age and skin condition, we recommend that you receive a series of treatments per week, once a day, for 15-20 minutes each time, and then regular maintenance every month. In order to achieve better results in beauty and skin care, it is recommended to maintain continuity and consistency and persist for several weeks to see obvious results.

Is the M500 mask suitable for beards and facial skin? What kind of light is best to use it under?

Our masks are mainly used for facial skin care. If customers want to use it on beards, we recommend using the red light mode (red light + near infrared light). Near infrared light has a certain auxiliary effect on hair growth!

Will the remote control heat up during use?

The mask will generate about 10 watts of power during use, so it is normal for the controller to heat up. The shell temperature reaches about 45 degrees Celsius, which will not cause burns to the skin, nor will it cause safety hazards such as melting glue.

Will light leak into the eyes when using the M500 mask?

There may be some light leakage outside when it is first put on, but it is not very dazzling after it is actually put on. The light that passes through can thoroughly protect the eyes. In addition, you can gently press the nose part of the mask to make it fit more closely to the skin and effectively prevent light leakage.

If you use the M500 mask while applying a mask, how to clean it?

To keep the product hygienic, we recommend removing makeup and ensuring your skin is clean before use. Our product is designed with a double-layer waterproof light panel and waterproof lamp beads. If you need to wear a mask when applying a mask, this is also supported. After use, we recommend wiping it with a damp cloth to clean it.

If the green light is on, does it mean that the battery is fully charged?

If the green light flashes, it means it is charging, and if the green light is not flashing, it means it is fully charged. If the red light flashes, it means the controller needs to be charged.

• Lightweight, radiant skin: Introducing the new LED Light Therapy Mask, your path to radiant beauty!
• Light as a Feather: Provides a comfortable fit without feeling heavy, causing pressure on the nose or indentations around the eyes. Feel the comfort with every use. There is almost no glare to the eyes when using the device.
• New comfortable design: eyes are protected from light leakage and damage, intuitive operation mode, easy to use.
• Built-in battery: Extended standby time, no need for an additional mobile power bank, very suitable for use on the go. (We have set up "output" and "input" interfaces, the input interface is used to charge the controller. The output interface is used to connect the mask. However, in general, we do not recommend that users use it while charging, as this may affect the battery life.)
• 4 LED light models to choose from: Near infrared (NIR) 850nm + red 630nm; Blue light, yellow light, violet light mixed light (NIR (NIR) 850nm + red light 630nm + blue light 460nm) for deep skin care, making the skin radiant, 8 levels of temperature protection for safe skin treatment.
• Adjustable elastic band: one-time adjustment, repeated and comfortable use, skin-friendly leather and fabric, bring luxurious comfort to your skin.
• Transform your skincare routine today! Enjoy the beauty of light therapy with our innovative face masks for radiant, healthy-looking skin!